Fusion Ribbed Smooth Pro Tiles

The FUSION Ribbed Smooth Pro tile is the latest flooring tile currently under construction and testing and will be introduced into our current range very shortly.

This tile has been created to protect and improve your floor using the latest technologies while benefiting from years of development and refinements.

Not only are the FUSION Ribbed Smooth Pro tiles Stylish, Strong and not to mention very Affordable, but they have been developed to be functional for the harsh New Zealand environments.

The FUSION Ribbed Smooth Pro tile is constructed using a reinforced A grade polypropylene with an exclusive composition which has been specially designed to stand up to the demanding interior and exterior conditions it will be applied in.

Being modular, the FUSION Ribbed Smooth Pro tile adapts only to the limits of your imagination to create your own unique environment, and within hours, not days, your creation is complete.

LOW MAINTENANCE

The FUSION Ribbed Smooth Pro tile has a unique open slat design to allow liquids, dust and small elements to pass through all while providing a smooth flat finish which also leaves a clean presentable surface. This is a great advantage in high traffic areas such as showrooms, workshops, and trade show areas.

Engineered with an advanced channel system under the tile, you can easily remove dirt and debris with a shop vacuum, hose, or a water blaster.

STYLISH DESIGN

The FUSION Ribbed Smooth Pro tile is designed to be the perfect modular floor tile.

We have worked hard to eliminate most of our competitors flaws with our FUSION Pro tile range. The most important of these is a common surface defect that many other competing tiles have, being a visible injection point in the surface.

All of our FUSION Pro tiles have four separate injection points on the underside of the tile, to not only give it its strength of a 4-point injection process but also eliminates the visible defect of the injection points.

Some companies will insist that this is a technical necessity to promote a good manufacture process, but this is not the case as we have proven.

The FUSION Ribbed Smooth Pro tiles are devoid of these unsightly injection points.

SUPERIOR STRENGTH

Our FUSION Ribbed Smooth Pro tiles are designed with 24 fasteners per tile (six on each side, 12 male and 12 female) for a very strong unique hold.

With a 20,000kgs rollover weight capacity and a compressive strength of 2450 psi, the FUSION Ribbed Smooth Pro tile will more than meet your everyday needs.

INDOOR AND OUTDOOR USE

Use your FUSION Ribbed Pro tiles indoor or outdoor with no worries at all. Thanks to its exclusive make up these tiles have the colour pigment and a UV stabiliser injected throughout the tile during the 4-point injection process giving the tile its suitability to be used in many outdoor situations such as swimming and spa pool areas, carports and decks.

Due to its smooth perforated design and non-slip treatment, the FUSION Ribbed Smooth Pro tile is ideally suited to wet areas keeping the flooring surface dry and safe. This also allows air to pass freely through the channel system underneath promoting the constant evaporation of moisture.

EASY TO INSTALL

The FUSION Smooth Pro tile system is very easy to install and can completed in only a matter of hours, not days, like many other floor coverings such as epoxy, paint, and carpet.

There is no smell with the tile installation, unlike epoxy and paint, and again unlike epoxy, paint and carpet, next to no preparation is required.

The only tools required for installation are a multitool, jigsaw, or skill saw (all with a fine-tooth blade) to cut any final tiles around placings.

CLEANING AND MAINTAINANCE

Cleaning your FUSION Ribbed Smooth Pro tiles is as simple as vacuuming dust and other debris up through the slats. With a tile height of 18mm, the lower structure creates smaller enclosed spaces which promote the vacuuming pressure.

You can mop the surface, use a hose or pressure blaster and these will not damage your tiles.

For stubborn marks, you can use an automotive degreaser, glass cleaner, or any other tough cleaner.

All of the FUSION tile range are resistant to all household cleaning products, petrol and strong industrial cleaners.

COLOUR RANGE

FUSION Ribbed Smooth Pro floor tiles are available in 17 awesome colours, including four colours in our elite metal colour range.

We are always developing new colours to add to our range and can add your specific colour on request.

You can combine different colours and mix with the different tile styles available in the range.

We can add a custom logo to showcase your style if you wish to stand out in the crowd.

WARRANTY