JLT COLD AIR INTAKE FOR 2016-2021 LT1 6.2L CAMARO
⚠ TUNE REQUIRED
GAINS AND TESTING:20-25 average RWHP gain over stock. Tune dependent.
DESCRIPTION
JLT’s New Cold Air Intake kits for the 2016-2021 Camaro in the textured black plastic finish.
Designed to make huge power this new kit has a large 120mm ID throughout the tube, with a 5” bell mouth at the MAF.
This huge 5” opening requires a huge filter. We love the tapered flange design and Power stack filtered ends of S&B’s filters and ended up with a monster 5×7” filter. With deep pleats, you don’t get much better than this. Finish it off with a silicone reducer and stainless clamps and you got the BEST Intake on the market!!!
MOLDED-IN MAF
It’s a full 120mm ID at the MAF area
HEATSHIELD
Includes ABS plastic heat shield to block engine heat at idle and low speed.
It incorporates the fresh air inlet from the grill.
It uses a large area to make sure the filter has tons of cool air.
KIT INCLUDES:
• JLT Black Textured Plastic Intake Tube
• Silicone Reducer
• 5×7 S&B Power stack Air Filter Red Oil
• ABS Heat Shield
• HD Clamps, & all needed hardware
GAINS AND TESTING
Up to 25 RWHP & RWTQ “peak” gains, but as high as 36 RWHP and RWTQ have been seen throughout the RPM range when used with our custom tune!
TUNING
A JLT specific tune is required with this kit.
YEAR | MAKE | MODEL | ENGINE |
---|---|---|---|
2016 | chevrolet | camaro lt1 | 6.2L, GAS |
2017 | chevrolet | camaro lt1 | 6.2L, GAS |
2018 | chevrolet | camaro lt1 | 6.2L, GAS |
2019 | chevrolet | camaro lt1 | 6.2l, gas |
2020 | chevrolet | camaro lt1 | 6.2l, gas |
2021 | chevrolet | camaro lt1 | 6.2l, gas |